US 10,939,754 B2

Solid Surface Locker w/ Reinforced Frame

This issued U.S. patent documents Locker with Solid Surface Panels and Embedded Structural Reinforcing. Structural reinforcement for a solid-surface locker assembly.

Original patent

Follow the drawings

Hidden metal strips reinforce solid-surface locker panels

Continuous metal reinforcement sits in recesses within the locker’s solid-surface panels. The embedded structure distributes the connections across the panel and provides places to attach neighboring lockers.

WHY IT MATTERS

The panel has an internal reinforcing structure behind its finished surface. Connection loads can be carried through that structure instead of a small fastening point alone.

Claim connection. Read the drawing alongside the issued claims; a patent title alone does not define the granted combination.

US10939754B2 · PDF page 3 · Figures 1–4

Finished panel contains hidden reinforcement

The side panel remains the visible locker surface. The drawing reveals reinforcing web members embedded into its exterior face.

WHY IT MATTERS

The visible panel and its embedded reinforcement form one supported locker wall.

Parts in this step: Solid-surface locker panel (103)

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

US10939754B2 · PDF page 3 · Figures 3–4

Recesses make room for the reinforcing strips

Dado-cut recesses receive the web reinforcement so the metal can sit flush with or below the surrounding panel face.

WHY IT MATTERS

A recessed reinforcement permits neighboring panels to fit together while retaining locations for connection.

Parts in this step: Reinforcement recesses

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

US10939754B2 · PDF page 3 · Figure 4

Continuous strips spread connections across the side panel

The web spans the side panel along multiple directions. The patent describes a continuous strip / web arrangement rather than merely adding isolated fasteners to brittle material.

WHY IT MATTERS

The web distributes the attachment structure across the panel instead of relying on a small threaded location alone.

Parts in this step: Side-panel reinforcement (129)

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

US10939754B2 · PDF page 3 · Figures 3–4

Back panel receives its own reinforcing structure

A corresponding reinforcing arrangement is disclosed for back wall 109. The isometric drawing lets the side and rear structures be compared.

WHY IT MATTERS

The back panel gains a reinforcing structure that provides connections across the panel face.

Parts in this step: Back-panel reinforcement (131)

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

US10939754B2 · PDF page 3 · Figure 3

Exposed reinforcement provides a place to attach another locker

The web’s exterior face provides a place to connect an adjacent locker. The claims specify the relationship between the recessed web, panel face and neighboring assembly.

WHY IT MATTERS

The connection function explains why the reinforcing member’s position and exposed face matter.

Parts in this step: Connection to the next locker

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

US10939754B2 · PDF page 3 · Figure 4

How the reinforced solid-surface panels works

Recesses in the solid-surface panel receive the reinforcing web. The web extends across the panel and sits flush with or below the surrounding face, preserving the panel’s fit against neighboring structure. Its exposed metal face provides attachment locations for an adjoining locker. The separated views explain how this fixed assembly is constructed.

WHY IT MATTERS

The solid-surface panel and embedded metal web provide a combined surface and attachment structure for adjoining lockers.

Parts in this step: Solid-surface locker panel (103) · Reinforcement recesses · Side-panel reinforcement (129) · Back-panel reinforcement (131) · Connection to the next locker

Claim connection. Operating description and drawing relationship; the following chapter identifies the selected claim limitations.

US10939754B2 · PDF page 3 · Figures 1–4

Which parts the patent claims together

Claim 1: Independent locker claim requires a recessed solid-surface sidewall and embedded continuous web strip spanning height, width and diagonal dimensions, with its outer surface exposed for connecting an adjacent locker. Claims 11 and 13: Independent method claims cover constructing/modifying the panels and embedding or attaching the web reinforcement with the specified geometry and exposed connection surface. Claims 2–10, 12 and 14: Dependent claims address one-piece/multi-piece metal, flush/recessed placement, adjacent-locker connections, fasteners and reinforced backwalls.

WHY IT MATTERS

This is where the specific relationship between parts is distinguished from the broader illustration and from related grants.

Parts in this step: Solid-surface locker panel (103) · Reinforcement recesses · Side-panel reinforcement (129) · Back-panel reinforcement (131) · Connection to the next locker

Claim connection. Issued claims in this grant; preserve dependent-claim relationships.

US10939754B2 · PDF page 3 · Figures 1–4

What the patent establishes

The claims describe a web reinforcement set within a solid-surface panel recess and its connecting relationship. A generic metal brace alone does not describe that complete combination. Production strength and load ratings require separate engineering evidence.

WHY IT MATTERS

The source establishes a disclosed arrangement. Production dimensions, operating limits and measured performance remain separate engineering inputs.

Claim connection. Do not treat every illustrated option as a requirement of every claim.

US10939754B2 · PDF page 3 · Figures 1–4

Claims, parts and drawing sheets
THE ISSUED CLAIMS

WHAT THE GRANT
DESCRIBES.

The grant describes particular reinforced-panel constructions using a recessed region and embedded web. Its claims focus on that arrangement rather than all solid-surface panels.

Claim 1

Independent locker claim requires a recessed solid-surface sidewall and embedded continuous web strip spanning height, width and diagonal dimensions, with its outer surface exposed for connecting an adjacent locker.

Claims 11 and 13

Independent method claims cover constructing/modifying the panels and embedding or attaching the web reinforcement with the specified geometry and exposed connection surface.

Claims 2–10, 12 and 14

Dependent claims address one-piece/multi-piece metal, flush/recessed placement, adjacent-locker connections, fasteners and reinforced backwalls.

Read the claim boundaries
  • The protected combination is more specific than any reinforced panel or steel-framed locker.
  • A rendered load path is explanatory and is not a finite-element analysis, load rating or durability test.
5 SOURCE-REFERENCED DETAILS

WHAT EACH
PART DOES.

Solid-surface locker panel · 103

What it does. The side panel remains the visible locker surface. The drawing reveals reinforcing web members embedded into its exterior face.

Why it matters. The visible panel and its embedded reinforcement form one supported locker wall.

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

Original patent PDF, page 3; Figures 3–4

Reinforcement recesses

What it does. Dado-cut recesses receive the web reinforcement so the metal can sit flush with or below the surrounding panel face.

Why it matters. A recessed reinforcement permits neighboring panels to fit together while retaining locations for connection.

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

Original patent PDF, page 3; Figure 4

Side-panel reinforcement · 129

What it does. The web spans the side panel along multiple directions. The patent describes a continuous strip / web arrangement rather than merely adding isolated fasteners to brittle material.

Why it matters. The web distributes the attachment structure across the panel instead of relying on a small threaded location alone.

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

Original patent PDF, page 3; Figures 3–4

Back-panel reinforcement · 131

What it does. A corresponding reinforcing arrangement is disclosed for back wall 109. The isometric drawing lets the side and rear structures be compared.

Why it matters. The back panel gains a reinforcing structure that provides connections across the panel face.

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

Original patent PDF, page 3; Figure 3

Connection to the next locker

What it does. The web’s exterior face provides a place to connect an adjacent locker. The claims specify the relationship between the recessed web, panel face and neighboring assembly.

Why it matters. The connection function explains why the reinforcing member’s position and exposed face matter.

Claim connection. Shown in the specification; compare the granted combination in the claim chapter.

Original patent PDF, page 3; Figure 4

PLAIN-LANGUAGE ANSWERS

UNDERSTAND
THE IDEA.

What does this invention do?

Continuous metal reinforcement sits in recesses within the locker’s solid-surface panels. The embedded structure distributes the connections across the panel and provides places to attach neighboring lockers.

Why does this help players or equipment staff?

The panel has an internal reinforcing structure behind its finished surface. Connection loads can be carried through that structure instead of a small fastening point alone.

How can I explore this invention?

Read the source walkthrough in order and select Highlight this detail to focus the original drawing. Use the drawing gallery or page controls to explore the full document.

Where can I read the original patent?

The complete original PDF is embedded on this page. You can also open it in a separate tab or download it for closer reading.

Original document and source record
Patent
US 10,939,754 B2
Original title
Locker with Solid Surface Panels Having Embedded Structural Reinforcing
Type
Utility patent
Filed
Aug 23, 2019
Granted
Mar 9, 2021
Inventors as printed
Sam Allen
Applicant as printed
Sam Allen
Original PDF pages
6
Original drawing pages
3
Issued-claim PDF pages
5, 6
Source SHA-256
f398f6706c8eb2e0bc462bfa3d9f7510c95a3d5270a386014b886b36f626e5e2
Additional sources and records

← All patents